The characteristics of
1. PID speed, current double loop regulator
2. compatible with hall and no hall, parameter setting, non-inductive mode is only suitable for special occasions (start the load is gentle)
3. High performance and low price
4. Chopper frequency of 20KHZ
5. the electric brake function, so that the motor response quickly
6. overload multiple is greater than 2, the torque can always reach the maximum at low speed
7. with over voltage, under voltage, over current, over temperature, hall signal illegal fault alarm function
Electrical Indicators
Recommended standard input voltage: 24VDC to 48VDC, undervoltage protection point 9VDC, overvoltage protection point 60VDC.
Maximum continuous input overload protection current: 15A. The factory default value is 10A.
Acceleration time constant Factory value: 1 second Other customizable.
Safety Precautions
This product is a professional electrical equipment, should be installed, debugging, operation and maintenance by professional and technical personnel. Improper use will lead to electric shock, fire, explosion and other hazards.
This product is powered by DC power supply. Please make sure that the positive and negative terminals of the power supply are correct before powering on
Do not plug or remove cables when they are powered on. Do not short-connect cables during power-on. Otherwise, the product may be damaged
If the motor needs to change direction during operation, it must be slowed down to stop the motor before reversing
The driver is not sealed. Do not mix electrical or combustible foreign bodies such as screws and metal chips into the driver. Pay attention to moisture and dust when storing and using the driver
The driver is a power device. Try to keep the heat dissipation and ventilation in the working environment
Parameters
| Driver |
ZLDBL5010S |
| Input voltage(V) |
24V-48V DC |
| Output current(A) |
10 |
| Control method |
Modbus RS485 |
| Dimension(mm) |
118*33*76 |
| Weight(kg) |
0.35 |
Dimension
Application
Packing
Production & Inspection Device
Qualification & Certification
Office & Factory
Cooperation